This is my first attempt at fudge and I’m really pleased with the results (but will be buying a sugar thermometer for next time!)
I’ve used a recipe I found online but adapted to suit my tastes (and the ingredients in my pantry).
Start with a large saucepan with a thick base and add the ingredients. I’ve used 450g Demerara sugar, 250ml Alpro cream, 150g Alpro coconut milk, 50g Pure Olive spread and 1 tbsp of golden syrup. (For the rum and raisin flavour – pictured above – I also added 100ml Bacardi at this point.
Bring to heat on a medium high and stir whilst cooking until the sugar has all dissolved and you have a consistent syrup which will be light brown and will smell amazing! (Reminded me of a very sugarey Bailey’s)
When all the sugar has dissolved and you have a consistent syrup bring the pan to the boil. It needs to reach a really high temperature of 112° – 116° and needs to be stirred regularly to prevent the sugars in syrup from burning to the base of the pan. The syrup will foam but keep boiling and keep stirring until it reaches this temperature.
As I didn’t have a thermometer when I made this fudge I used an alternative to measuring the temperature by “soft ball” ing the fudge. To do this have a pot of cool water close by and as the mixture boils take a small spoonful out of the pan and drop into into the water. If the syrup forms a soft ball you can mould and lift then it has reached the right temperature and is ready to remove from the heat. If it is still a liquid when poured into the cold water then it will need to boil for longer to reach temperature. An important learning curve here is to make sure the syrup has long enough to cool in the water before you try to mould it! Hot fudge syrup burns – safety first!
Once you have ensured the syrup has reached that temperature remove it from the heat entirely. At this point you can add extra flavouring – I’ve used dessicated coconut in the coconut fudge and added raisins for the rum and raisin. Then stir rigourously as the mixture cools down. You will notice the mixture become thicker and less glossy as you stir it. Keep stirring until the mixture of fairly cool and no longer too hot to touch and is pretty thick and creamy then pour into a line baking tray or dish to set.
I’ve learnt from the two batches I made that it is best to leave the fudge to set fully at room temperature. The coconut I made I popped into the fridge to cool and it created a split in the top and bottom with the bottom of the fudge being more like a toffee.
When fully set remove from the dish, peel off the baking paper and chop into bite sized pieces ready for a tasty treat!